High-speed jet stream which formed by compressed-air
pass through feed injector make powder materials suck into grinding
chamber. Pulverizing nozzles which are installed around the grinding
chamber inject high-speed jet stream to grinding chamber directionally,
make powder materials pulverized by the action of impaction and
friction between powder materials.
High-speed jet strem form strong rotational flow in the grinding
chamber, from this, the centrifugal force make powder particles
do high-speed movement around the grinding chamber. When particle
size is pulverized below classify size, particles come into collection
system through centre discharge tube because of losing certifugal
force and be broken away from the classification rotational flow
by the action of centrifugal air-stream.
• QS Horizontal Disk-Type Jet Mill is applicable for dry and
brittle materials to be ultrafine pulverized. It is easy to obtain
particles of micron meter grade or hypomicron meter grade. Uniform
• Obtain high-putity products by the action of autogenous between
• It is applicable for hard material under hardness 8 grade and sticky
material to be pulverized. because the liner could be replaced by
• It is also applicable for pulverizing of the powder materials with
thermal sensitivity and lower melting point because the temperature
fell with the adiabatic expansion of the compressed-air.
• No dust leakage and fly up because the container and pipes are sealed
• Noise below 70 db. No uibration.
• Small volume and easy to strip and clean.